Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

How to use Ktag 6.070 for Tricore BOOT

{ 10:23, 24 November 2017 } { 0 comments } { Link }
Ktag should be able to program with Jtag, BDM and Boot protocols.
However, I have no luck with Ktag 6.070 for Tricore BOOT;
My way is to rework the board
Before rework:Everything working fine (BDM, Kline etc.) except Tricore boot
Connection OK, ID OK , begin reading ok , then jump when reading and finish with “error reading” (between 20% and 44%)
I try with SID807EVO , EDC17C54 and MED17.5.2, same error.
I use Kess V2.11 & Trasdata, same thing
ktag-6070-tricore-boot


Solved!

The problem is crystal not murata
ktag-6070-tricore-boot-rework
for fix or change crystal or add capacitors 22pf
crystal murata does not need capacitors

ECU EDC17c54 in Bootmode OK and write OK, Crafter 120hp drive faster , everything is ok
ktag-EDC17c54-boot

Ps. When searching info on the web, i found some said their Ktag from http://www.obdexpress.co.uk/wholesale/ktag-ecu-k-tag-programming-tool-master-unlimited-token.html perfect for Jtag, BDM and all the Boot application (tricore and ST10). i’ll try next time.

Source:
http://blog.obdexpress.co.uk/2017/11/24/ktag-6-070-rework-for-tricore-boot/

{ Kommentar schreiben }

{ Last Page } { Page 39 of 42 } { Next Page }

ber Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  July 2018  »
MonTueWedThuFriSatSun
 1
2345678
9101112131415
16171819202122
23242526272829
3031 

Links


Kategorien


Letzte Beitrge

NO MPPS V21! Buy MPPS V18 Instead
JAGUAR&LAND ROVER 2018 NEWEST DIAGNOSTIC DOCTOR-LONSDOR JLR-IMMO OBD KEY TOOL
Tips and Guides for Users with Galletto V54 China Clone
How to use Obdstar X300 DP Plus for ECU programming
How to open ECU Bosch MED17 to read with Ktag/Kess

Freunde