![]() |
||
![]() |
Unbenannt | |||||||||||||||||||||||||||||||||||||||||||
Suggestion: KTMflash Reads/Writes ECUs (Infineon, gearbox, etc)
{ 06:48, 28 June 2018 }
{ 0 comments }
{ Link }
How to use KTMflash to read/write ECUs (Infineon, gearbox, etc) here: 1You have to use software from obdexpress.co.uk 2 ECU flash ![]() and the like cannot be installed in your PC/laptop before; that is, for your PC/laptop, it must be the first time to install KTMflash software. You’re asked to re-install a clean operation system and install KTMflash sw with the help of a video of installation tutorial; otherwise, your device would be locked. Video: How to install KTMflash for ECU read/write 3 Here are folders (KTMflash English... and KTMflash software...) inside the CD you should have. You can find out software and real tests which helps you a lot to use KTM flash. 4 The reason for why do you buy KTMflash is that, it’s good at reading Infineon ECUs and gearbox (transmission) ECU. 5 When you are reading encypted Infineon or ECUs, please read the password file (with reference to our video here). If the sw asks you to TURN OFF THE POWER SUPPLY FOR 2 SECONDS, please follow it.If the power is not off for 2 seconds, the pop-up might be appeared again in the interface. So, just turn it off for 2s and use the sw. 6 PLEASE FOLLOW THE VIDEO AND TUTORIAL TO CHOOSE THE SWITCH YOU’RE GONNA USE. Attachment: KTMflash ECU List http://blog.obdexpress.co.uk/2018/06/13/ktm-flash-ecu-programmer-switch-board-user-manual/ Src: http://blog.obdexpress.co.uk/2018/06/28/tips-ktmflash-reads-writes-ecus/ { Kommentar schreiben } { Last Page } { Page 69 of 104 } { Next Page } |
Über Mich![]() Mein Profil Archiv Freunde Mein Photo Album
LinksKategorienLetzte BeiträgeClone Kess 5.017 Ksuite 2.47 review yes and no (Newest)How To Solve Vxdiag Nano GM GDS2 firmware checksum is incorrect How to solve IDS V108 "Selection not available" How to solve IDS V108 "Selection not available" ktmflash + powerbox tested on edc17C10 Work Fine! Freunde |