Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

How to open ECU Bosch MED17 to read with Ktag/Kess

{ 10:45, 28 June 2018 } { 0 comments } { Link }
This is how to open Bosch MED17 ECU:
AUDI-med17-ECU

Here: gpt med17 ECU model from Audi a1 1,4tfsi 2016.


The problem is that the board is clamped in the housing. After assembly, the unit is pressurized from both sides. If you look at the sides, you can see the place in which it is clamped in these places charge clamped body. If you try to pull the plug, it may damage the contacts. (They break off at the point of bending, while the output of the board.)

Here with photos attached, hope you guys find this helpful ... 








Kess v2 5.017 experience on med 17.5:
- I tested it worked, MED17.5.5 Audi A3 2.0T Sport 2012
read / write
- Vag med17.5 worked
- you can r/w if ecu is TC1766 (without tprot), if tc1767 only boot mode
- Golf GTI MK6 MY2011 works very well (ECU & DSG).
- Golf 7, This ecu cant be read OBD with Kess, you need to have file before from server etc.
You can read with Ktag, but ugly job to open ecu..



Tech support from obdexpress.co.uk TECH blog :

{ Kommentar schreiben }

{ Last Page } { Page 49 of 86 } { Next Page }

Über Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  December 2018  »
MonTueWedThuFriSatSun
 12
3456789
10111213141516
17181920212223
24252627282930
31 

Links


Kategorien


Letzte Beiträge

How to clone ID48 96bits with Xhorse VVDI key tool?
Use Xtool Anyscan A30 diagnose Audi A6 2011 with an iPhone
How does Ktag KTM100 work with Mercedes ME9.7 ECU and Renew Cable?
Can I buy Lonsdor K518ise for BMW CAS keys only?
How to change a language for Diagbox 7.83

Freunde