Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

BDM Adapter Review: Write EDC17C46 Vw Yeti 2014 with KTAG

{ 03:29, 21 August 2018 } { 0 comments } { Link }
This is my experience pack software using BDM frame connectors china clone with  Ktag 2.23

I have already received the shipment and I have time to test them without problems in Bosch EDC16U1 and in bosch EDC17c46. before using them I have reviewed almost all of these and I have not had any problem with the circuits, the lines or the solders of the pins. Someone mentioned that I had problems with resistance and fortunately I did not have these problems. So far all circuits and components are well installed and functioning as it should be.

Here I attach some photos where you can see how I start writing on a
Bosch EDC17c46 ECU from Vw Yeti 2014

图片bdm-adpater-review-1 1-7
bdm-adpater-review-1

bdm-adpater-review-2

bdm-adpater-review-3

bdm-adpater-review-4

bdm-adpater-review-5

bdm-adpater-review-6

bdm-adpater-review-7


ktag-write-EDC17c46-Vw-Yeti-2014-1

ktag-write-EDC17c46-Vw-Yeti-2014-2

ktag-write-EDC17c46-Vw-Yeti-2014-3

ktag-write-EDC17c46-Vw-Yeti-2014-4

ktag-write-EDC17c46-Vw-Yeti-2014-5

ktag-write-EDC17c46-Vw-Yeti-2014-6

ktag-write-EDC17c46-Vw-Yeti-2014-7

ktag-write-EDC17c46-Vw-Yeti-2014- 8


PS. the only thing I did not like is the connector for siemens pcr2.1.
I do not understand the connections very well since they do not coincide with the Ksuit scheme


I bought all from this seller: the bdm frame with adapters 
the bdm frame with adapters






{ Kommentar schreiben }

{ Last Page } { Page 35 of 86 } { Next Page }

ber Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  December 2018  »
MonTueWedThuFriSatSun
 12
3456789
10111213141516
17181920212223
24252627282930
31 

Links


Kategorien


Letzte Beitrge

How to clone ID48 96bits with Xhorse VVDI key tool?
Use Xtool Anyscan A30 diagnose Audi A6 2011 with an iPhone
How does Ktag KTM100 work with Mercedes ME9.7 ECU and Renew Cable?
Can I buy Lonsdor K518ise for BMW CAS keys only?
How to change a language for Diagbox 7.83

Freunde