Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

How to read an SD card for Kess 5.017 or create a new one

{ 03:05, 17 January 2019 } { 0 comments } { Link }
Guide:How to read an SD card for Kess 5.017 or create a new one

128 MB XOR Key01-13.zip
https://mega.nz/#!kRxTwQxZ!Vw6g3ROBHr9w7aboGEe97UPIbv2ruVOvlLIZaH1HPDY
Zip Password = "kess5017"

Note: Only Kess 5.017 or 5.028, not for 3.099 etc.

Have the instructions for new SD cards:
You need :
WinHex and XorFiles v1.0 http://www.nirsoft.net/utils/xorfiles.html
Insert your Original SD-Card to Cardreader on PC.
Run WinHex, press F9 open Disk, read your SD-card.
Mark 208Bytes = 13 lines from 0x00000270 to 0x0000033F.
kess-5-017- create-a-new-sd-card-01


Copy 13 lines to new file.
Open in WinHex my Keyfile “128 MB XOR Key01-13.img”
Search and replace line 1 in your Keyfile with all line1 lines in “128 MB XOR Key01-13.img”
Search and replace line 2 in your Keyfile with all line2 lines in “128 MB XOR Key01-13.img”
….............................
Search and replace line 13 in your Keyfile with all line13 lines in “128 MB XOR Key01-13.img”
kess-5-017- create-a-new-sd-card-02

Save your new 128 MB XOR Key01-13.img
run XorFiles v1.0
Filename 1: = your original SD-Imagefile
Filename 2: = your new createt “SD128 MB XOR Key01-13.img” (with your 13 lines ;-)
Destination: = any filename for your new uncryptet Imagefile
kess-5-017- create-a-new-sd-card-03


if you have decrypted the files, you can integrate the decryptet image file with "ImDisk Virtual Disk
Driver" as a virtual drive and save the files to the PC.
Link to ImDisk https://sourceforge.net/projects/imdisk-toolkit/
If you want to use any new SD-Card in your Kess 5017, use Winhex to fill the SD-card with 00 .
put SD-card in Kess, power on Kess.
The 13-line KEY = 208 Bytes is x times on the SD.
From 0x000000D0 it is on some empty SD cards.
If you not found search any other line.
It is important that from line 0 always the 13 lines are
13, 26, 39, 52 ..... 4160 ..... 344032 etc.
that is, 0x0001040 is in decimal 4160,
13 rows = 208 bytes,
4160 divided by 208 = 20
Or 53FE0 = decimal 344032
344032 divided by 208 = 1654
that means if you think you have found the key you have to divide the address (decimal) by 208
without anything after comma.
then the start same Procedur to create a new “SD128 MB XOR Key01-13.img” file with new SDCard
Key.
Format the new SD-card with FAT , copy Files to SD-ard and crypt it with “XorFiles

http://blog.obdexpress.co.uk/2019/01/17/kess-5-017-how-to-read-sd-card-or-create-a-new-sd-card/
{ Kommentar schreiben }

{ Last Page } { Page 81 of 174 } { Next Page }

ber Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  November 2019  »
MonTueWedThuFriSatSun
 123
45678910
11121314151617
18192021222324
252627282930 

Links


Kategorien


Letzte Beitrge

How to Solve K-Suite Install error "Cannot open/create C:Ksuite247Ksuite.exe file"?
Unbenannt
How to use Tacho PRO 2008 to change mileage for BMW E87
Opel EDC16C9 ecu reading and writing tools feedback
IPROG+ ECU Programmer Isuzu Dmax 2010:All Key Lost Wokrs

Freunde