Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

How to rework clone KESS V2 green PCB in the correct method?

{ 08:14, 27 March 2019 } { 0 comments } { Link }
Because some people are making some good money out of it (rework clone KESS V2 green PCB ), let’s make it free for everyone.

PS: the following red parts are the correct method. 
Transistors to use : 
BCR112
MMUN2113
BC817
Murata filters:
NFE61PT472C1H9L (connect ground for all of them)
Correct method:
Connect MIDDLE PINS MURATTA FILTERS TO GROUND, not the signal
Capacitors:
1uF – 35V
220uF – 10V
10uF – 16V tantalum

Go Follow Picture.
I changed Voltage Stabilizators as well
1 x LM1117 3.3v
1 x PZT2907AT1G
1 x LM2575s 5.0V
all diodes SK14 (not required)
Micro SD Card to better quality if is NO NAME (BLANK on the top) but very carefull, is not easy just copy CONTENT, need generate againb becase another card have diffrent CID so will doesn`t work, if you copy 1:1
KESS_REWORK


Compare with V5.017 Kess China clone green PCB:

KESS_REWORK 2

KESS_REWORK 3


BTW, reword has certain requirements on the user’s skills, please be careful. Invest the original one or the clone one will be better.

Thanks to @pocinas from DK forum.
Thanks Laurance editor.
SOURCE:http://blog.obdexpress.co.uk/2019/03/27/how-to-rework-clone-kess-v2-green-pcb/

{ Kommentar schreiben }

{ Last Page } { Page 69 of 185 } { Next Page }

ber Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  January 2020  »
MonTueWedThuFriSatSun
 12345
6789101112
13141516171819
20212223242526
2728293031 

Links


Kategorien


Letzte Beitrge

Solved! GM GDS2 "No Valid Lease Found"
How to solve KTAG V7.020 Bosch EDC16+ Communication error with the ECU
EDC17C46 read and write, any tested ECU programmer via OBD?
BMW FEM BDC mileage reset on Bench with Yanhua MINI acdp
Iprog+ Pro clone V80 free download

Freunde