Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

VCM2 clone review: SP177-C1 the best!

{ 09:35, 22 June 2019 } { 0 comments } { Link }

obdexpress.co.uk seem to be the place to buy a decent clone their boards seem to be the good quality ones described on mhhauto,

I do use China clone with Mazda IDS and never had issue on 2010+ vehicle. Clone # sp177C-1 is working good also on 2010+ but this model isn't available anymore.
As for sp177c , I have no experience with it. just make sure you don't buy anything that's based on allscanner/VXdiag technology. Those are complete crap

But don't expect any clone VCM2 will do old PCM programming, because of the EEprom programming signal higher voltage required can't be produced by those clones.
In short, when programming these PCM, the VCM sends a higher voltage (around 18v) to 1 pin of the PCM to "open" the programming session. Clones can't do that.
the only tool that I know that does it is the new thing from FLY but....(and there's a BIG but)... it won't let you program some older cluster and ABS ecu. Ive tested it on some cars and so far, not so good.
Better get an OEM VCM2 as I did.
Buy 1 good tool instead of 2 or 3 crap tool


DONT BUY SP177-1
Never worked

DONT BUY SP177-2
1 - USB cable that came with it doesn't even fit the tool. It's just too big to reach the connector.
2 - they state same as sp177-c or sp177-c1 which is a big lie. Components quality is nothing near similar.
3 - most important.. it's unusable. It keeps disconnecting from the laptop every 10 to 20 sec while watching data logger. I don't want to even risk programming with it.

SP177-C1 THE BEST
SP177-C1 is the best, then SP177 I think
A good price. Well worth the money.
Link to SP177-C1: http://blog.obdexpress.co.uk/2018/01/21/vcm-2-best-quality-sp177-c1/

Source:http://blog.obdexpress.co.uk/2019/06/22/vcm2-clone-review-sp177-c1-the-best/
{ Kommentar schreiben }

{ Last Page } { Page 45 of 193 } { Next Page }

Über Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  April 2020  »
MonTueWedThuFriSatSun
 12345
6789101112
13141516171819
20212223242526
27282930 

Links


Kategorien


Letzte Beiträge

5 probe adapters make iprog / xprog work no need welding points
BMW E60 530d ECU Programming Tool Advice
Fixed! Ford VCM II " Battery voltage low" while module programming?
03.2020 Xentry/DAS XDOS Download
Read PPD 1.2 via OBD or BDM? which ECU programmer?

Freunde