Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

How to read Kia kefico m7.9.8 with trastata, Ktag and FGTech?

{ 08:48, 30 July 2019 } { 0 comments } { Link }
Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, need Ktag, FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.

read-kia-kefico-m7.9.8-00

  1. Read Kia kefico m7.9.8 with FGTech, here is a tutorial
http://blog.obdexpress.co.uk/2017/08/08/fgtech-galletto-v54-100-readwrite-bosch-mg-7-9-8/

  1. Read Kia kefico m7.9.8 with transdata and Ktag, here is a tutorial.

BOSCH_M798_KIA
The LAY by pins are located on the lower part of the ECU
PLUGIN 167
read-kia-kefico-m7.9.8-01

Connect the power (+12v) only for DIRECT CONNECTION,
do not connect power (+12V) with DIMA CONNECTION
read-kia-kefico-m7.9.8-02
DIRECT CONNECTION
Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures.
read-kia-kefico-m7.9.8-03

DIMA CONNECTION
Connect the blue wire to POL5 and to DIMA adapter as shown in the picture.
read-kia-kefico-m7.9.8-04 read-kia-kefico-m7.9.8-05

I would advise using pencil, it is always faster, comfortable and clean to work.
read-kia-kefico-m7.9.8-06

From http://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm100-fgtech-kess-ktag.html


http://blog.obdexpress.co.uk/2019/07/30/how-to-read-kia-kefico-m7-9-8/
{ Kommentar schreiben }

{ Last Page } { Page 24 of 185 } { Next Page }

Über Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  January 2020  »
MonTueWedThuFriSatSun
 12345
6789101112
13141516171819
20212223242526
2728293031 

Links


Kategorien


Letzte Beiträge

Solved! GM GDS2 "No Valid Lease Found"
How to solve KTAG V7.020 Bosch EDC16+ Communication error with the ECU
EDC17C46 read and write, any tested ECU programmer via OBD?
BMW FEM BDC mileage reset on Bench with Yanhua MINI acdp
Iprog+ Pro clone V80 free download

Freunde