![]() |
||
![]() |
Unbenannt | ||||||||||||||||||||||||||||||||||||||||||||||||||
How to read Kia kefico m7.9.8 with trastata, Ktag and FGTech?
{ 08:48, 30 July 2019 }
{ 0 comments }
{ Link }
Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, need Ktag, FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.![]()
BOSCH_M798_KIA The LAY by pins are located on the lower part of the ECU PLUGIN 167 ![]() Connect the power (+12v) only for DIRECT CONNECTION, do not connect power (+12V) with DIMA CONNECTION ![]() DIRECT CONNECTION Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures. ![]() DIMA CONNECTION Connect the blue wire to POL5 and to DIMA adapter as shown in the picture. ![]() ![]() I would advise using pencil, it is always faster, comfortable and clean to work. ![]() From http://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm100-fgtech-kess-ktag.html http://blog.obdexpress.co.uk/2019/07/30/how-to-read-kia-kefico-m7-9-8/ { Kommentar schreiben } { Last Page } { Page 17 of 178 } { Next Page } |
Über Mich![]() Mein Profil Archiv Freunde Mein Photo Album
LinksKategorienLetzte BeiträgeHow to upgrade XPROG V6.12 from Xprog V5.84?How does Lonsdor K518S add key for Ford Focus 2005? KTM Bench wiring diagram: Best OBD flash tool clone for EDC17 How to Solve K-Suite Install error "Cannot open/create C:Ksuite247Ksuite.exe file"? Freunde |