Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

How to read Kia kefico m7.9.8 with trastata, Ktag and FGTech?

{ 08:48, 30 July 2019 } { 0 Kommentare } { Link }
Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, need Ktag, FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.

read-kia-kefico-m7.9.8-00

  1. Read Kia kefico m7.9.8 with FGTech, here is a tutorial
http://blog.obdexpress.co.uk/2017/08/08/fgtech-galletto-v54-100-readwrite-bosch-mg-7-9-8/

  1. Read Kia kefico m7.9.8 with transdata and Ktag, here is a tutorial.

BOSCH_M798_KIA
The LAY by pins are located on the lower part of the ECU
PLUGIN 167
read-kia-kefico-m7.9.8-01

Connect the power (+12v) only for DIRECT CONNECTION,
do not connect power (+12V) with DIMA CONNECTION
read-kia-kefico-m7.9.8-02
DIRECT CONNECTION
Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures.
read-kia-kefico-m7.9.8-03

DIMA CONNECTION
Connect the blue wire to POL5 and to DIMA adapter as shown in the picture.
read-kia-kefico-m7.9.8-04 read-kia-kefico-m7.9.8-05

I would advise using pencil, it is always faster, comfortable and clean to work.
read-kia-kefico-m7.9.8-06

From http://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm100-fgtech-kess-ktag.html


http://blog.obdexpress.co.uk/2019/07/30/how-to-read-kia-kefico-m7-9-8/

How to read Kia kefico m7.9.8 with trastata, Ktag and FGTech?

{ 08:48, 30 July 2019 } { 0 Kommentare } { Link }
Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, need Ktag, FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.

read-kia-kefico-m7.9.8-00

  1. Read Kia kefico m7.9.8 with FGTech, here is a tutorial
http://blog.obdexpress.co.uk/2017/08/08/fgtech-galletto-v54-100-readwrite-bosch-mg-7-9-8/

  1. Read Kia kefico m7.9.8 with transdata and Ktag, here is a tutorial.

BOSCH_M798_KIA
The LAY by pins are located on the lower part of the ECU
PLUGIN 167
read-kia-kefico-m7.9.8-01

Connect the power (+12v) only for DIRECT CONNECTION,
do not connect power (+12V) with DIMA CONNECTION
read-kia-kefico-m7.9.8-02
DIRECT CONNECTION
Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures.
read-kia-kefico-m7.9.8-03

DIMA CONNECTION
Connect the blue wire to POL5 and to DIMA adapter as shown in the picture.
read-kia-kefico-m7.9.8-04 read-kia-kefico-m7.9.8-05

I would advise using pencil, it is always faster, comfortable and clean to work.
read-kia-kefico-m7.9.8-06

From http://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm100-fgtech-kess-ktag.html


http://blog.obdexpress.co.uk/2019/07/30/how-to-read-kia-kefico-m7-9-8/

Über Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  September 2019  »
MonTueWedThuFriSatSun
 1
2345678
9101112131415
16171819202122
23242526272829
30 

Links


Kategorien


Letzte Beiträge

IPROG+ ECU Programmer Isuzu Dmax 2010:All Key Lost Wokrs
An OBD tool and software for removing dpf,egr,adblue, nox
Free download Ksuite, iprog+, ktm bench, MPPS, ktmflash, carprog ,xprog
Unbenannt
CG AT200 done Bosch Delphi ECU programming: works fine

Freunde