Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

Wie registrieren und OBDSTAR X300 DP Plus Update?

{ 03:34, 18 February 2020 } { 0 Kommentare } { Link }


How to do Mercedes W205 GFZ coding with DTS Monaco?

{ 10:55, 11 February 2020 } { 0 Kommentare } { Link }
DTS Monaco running with SD Connect C4 Plus can code Mercedes W205 successfully.

In detail:
Hardware: sdconnect C4 Plus (sdconnect C4 upgrade version in 2019)
Software: DTS Monaco (contained in sdconnect C4 Plus

Procedure:

  1. Mercedes W205 dashboard.
Dts Monaco Code Mercedes W205 01

  1. Open DTS Monaco.
Dts Monaco Code Mercedes W205 02

  1. Look at GFZ_Coding.
Dts Monaco Code Mercedes W205 03 Dts Monaco Code Mercedes W205 04

  1. Click on "Save".
Dts Monaco Code Mercedes W205 05

  1. Choose "Read ECU identification only", then click on "Start".
Dts Monaco Code Mercedes W205 06

  1. Choose "Clear errors, read data", then click on "Start".
Dts Monaco Code Mercedes W205 07
  1. Choose "Variant Coding", then "ECU -IC222 (UDS_CAN_D), then "Connect".
Dts Monaco Code Mercedes W205 08 Dts Monaco Code Mercedes W205 09 Dts Monaco Code Mercedes W205 10
Again, thanks to sd connect C4 Plus running with DTS Monaco.

Source:http://blog.obdexpress.co.uk/2020/02/11/how-to-code-mercedes-w205-with-dts-monaco/

Solved! GM GDS2 "No Valid Lease Found"

{ 02:36, 7 January 2020 } { 0 Kommentare } { Link }
Obdexpress.co.uk engineer offer the working solution to GM GDS2 software error "No valid lease found" .
Gm Gds2 No Valid Lease Found Solution 01 Gm Gds2 No Valid Lease Found Solution 02
Images: GM MDI (SP163-D) GDS2 software "No valid lease found".

What reason and how to do:
Please reset the computer time to the current time, if failed, please try to install GDS2 software on another computer.

However, if you used vxdiag vcx nano GM cable, you may start GDS2 software from VX Manager, please run GDS2 from patch directly.
We made one video and uploaded it on youtube, it's on how to install GDS2 Software 02.2019 on win7:


Good luck!
Source:http://blog.obdexpress.co.uk/2020/01/06/gm-gds2-no-valid-lease-found-solution/

How to solve KTAG V7.020 Bosch EDC16+ Communication error with the ECU

{ 04:02, 3 January 2020 } { 0 Kommentare } { Link }
If your Ktag V7.020 clone had error "Communication error with the ECU: control all connections...",  please try any of the following solutions, all are tested by experienced users.

ECU type: Bosch EDC16+ BMW (P100)

Using: KTAG V7.020 ksuite v2.25 (red pcb)  

Error: "Communication error with the ECU: control all connections; if the problem persists, send the LOG file to the assistance"
ECUktag V7 020 Bosch Edc16 Communication Error Solution 01 ECUktag V7 020 Bosch Edc16 Communication Error Solution 02 ECUktag V7 020 Bosch Edc16 Communication Error Solution 03 ECUktag V7 020 Bosch Edc16 Communication Error Solution 04
Please try any of the following solutions:
  1. k-tag communication error: please check power connections- 0x100B
- First change your 12v external adapter if work ok or else fault in k-tag
- After installation of software you have to copy help file to the installation directory, that's why I access to alientech database when click read.
Video guide: https://www.youtube.com/watch?v=hs5LAfNhmd4

  1. In the similar method as above.
    In this case as a power source use the original transformer that brings the ktag that also does not reach 12v.
@eltoke (cartechnology.co.uk) feedback.

  1. Try with independent power supply to ECU instead of KTAG cable.

  1. Sure is not voltage problem, I did always this ecu with 12V 1000 mA.

  1. Rework your Hardware Ktag PCB.
@DK Veteran's option

  1. If you use clone ktag, this ecu have been remapped another tuner via other tool..
    Yes your ktag not read because ecu's file has did changed so ktag is not connect ecu.
    Use Another tool. Same like x17-kess-fgtech-cmd and more...
  2. Have you checked the right position of the wire inside your DB15? maybe this pics can help you to check
ECUktag V7 020 Bosch Edc16 Communication Error Solution 05 ECUktag V7 020 Bosch Edc16 Communication Error Solution 06
8.Or just solder boot pin, maybe bad connection.
happened to my once or twice.

  1. Pin 3 +15 = 12v pin 2 = gnd. connect to these with bench power supply or similar instead of using K-tag to power up ECU, leave everything else the same.
    I have had to do this a few times and that's with genuine k-tag too.
    Also check wire on both Boot pins.

Good luck!

If you need good quality Kess v2 clone, here you can go:
http://www.obdexpress.co.uk/wholesale/kess-v5.017-ecu-online-version.html

Thanks.

 Source:http://www.obdexpress.co.uk/service/solved-ktag-v7.020-bosch-edc16-communication-error-with-the-ecu.html

EDC17C46 read and write, any tested ECU programmer via OBD?

{ 05:01, 2 January 2020 } { 0 Kommentare } { Link }


Über Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  February 2020  »
MonTueWedThuFriSatSun
 12
3456789
10111213141516
17181920212223
242526272829 

Links


Kategorien


Letzte Beiträge

Wie registrieren und OBDSTAR X300 DP Plus Update?
How to do Mercedes W205 GFZ coding with DTS Monaco?
Solved! GM GDS2 "No Valid Lease Found"
How to solve KTAG V7.020 Bosch EDC16+ Communication error with the ECU
EDC17C46 read and write, any tested ECU programmer via OBD?

Freunde