Unbenannt

<%PostCommentPage%> <%PhotoAlbumPage%> <%ProfilePage%>

What’s the BEST solution of Xentry XDOS Installation & Activation failure?

{ 03:23, 15 September 2018 } { 0 comments } { Link }
This is the best solution for newbies who has trouble in 09.2018 Xentry XDOS installation or activation:
http://www.obdexpress.co.uk/wholesale/mb-sd-connect-compact-4-star-dell-d630-laptop.html

Why do I think it’s the best for newbies?
Because the full kit (SDconnect C4 + 09.2018 XDOS + Dell D630)  is handy and help save a lot.
XENTRY-DAS-OPENSHELL-1

All software is installed on the Dell D630 laptop, done before shipping to your end.
With the dedicated serial port on D630, there is no issue for users…. it was plug and play… the HDD with Mercedes software is loaded into the Dell laptop and WIS/EPC and XENTRY/DAS has been activated with “activation keys” before delivery...you can use it for Mercedes-Benz diagnostics, coding or programming with SD connect C4, when you receive the package.
 




Source: http://www.obdexpress.co.uk/wholesale/2018-09-mb-sd-benz-c4-c5-software-ssd.html

Note that HTT-WIN is updated to 09.2018 Mercedes software disk. Software released in 2017 and 2018 doesn’t come with HTT-WIN. But now, it comes again!
09.2018-htt-win-mercedes

On a side note, Dell D630 is second-hand but 100% functional - no worries!


With the SD connect C4 full kit, you’ll NEVER have issues of setup on a laptop, installation and activation as what the users complaints

Attach: Error and solution on Dell D630

Error: have now installed it on my recently acquired Dell 630. Everything installed well, however when I get to the point of using it and it automatically goes to use HHT(as my car is a 1993 model)it says"diagnostic connector is being initialised" however then it says"com port assigned! close other use!"
Solution: go to the windows system menu in control panel and under the harware section look at the com port assignmennts and make sure the com port you designated isn't already assigned to something else.

also, does the dell630 have a dedicated RS232 com port or are you using a usb/pcmcia/cardbus to RS232 converter.

This is the best solution for newbies who has trouble in 09.2018 Xentry XDOS installation or activation:
http://www.obdexpress.co.uk/wholesale/mb-sd-connect-compact-4-star-dell-d630-laptop.html

Why do I think it’s the best for newbies?
Because the full kit (SDconnect C4 + 09.2018 XDOS + Dell D630) is handy and help save a lot.
All software is installed on the Dell D630 laptop, done before shipping to your end.
With the dedicated serial port on D630, there is no issue for users…. it was plug and play… the HDD with Mercedes software is loaded into the Dell laptop and WIS/EPC and XENTRY/DAS has been activated with “activation keys” before delivery...you can use it for Mercedes-Benz diagnostics, coding or programming with SD connect C4, when you receive the package.

Source: http://www.obdexpress.co.uk/wholesale/2018-09-mb-sd-benz-c4-c5-software-ssd.html

Note that HTT-WIN is updated to 09.2018 Mercedes software disk. Software released in 2017 and 2018 doesn’t come with HTT-WIN. But now, it comes again!
On a side note, Dell D630 is second-hand but 100% functional - no worries!


With the SDconnect C4 full kit, you’ll NEVER have issues of setup on a laptop, installation and activation as what the users complaints
Xentry-XDOS-installation-actvation-best-solution-1

Xentry-XDOS-installation-actvation-best-solution-2

Attach: Error and solution on Dell D630

Error: have now installed it on my recently acquired Dell 630. Everything installed well, however when I get to the point of using it and it automatically goes to use HHT(as my car is a 1993 model)it says"diagnostic connector is being initialised" however then it says"com port assigned! close other use!"
Solution: go to the windows system menu in control panel and under the harware section look at the com port assignmennts and make sure the com port you designated isn't already assigned to something else.

also, does the dell630 have a dedicated RS232 com port or are you using a usb/pcmcia/cardbus to RS232 converter.

 Source:http://blog.obdexpress.co.uk/2018/09/14/xentry-xdos-install-activate/
{ Kommentar schreiben }

{ Last Page } { Page 103 of 160 } { Next Page }

ber Mich

Start
Mein Profil
Archiv
Freunde
Mein Photo Album

«  July 2019  »
MonTueWedThuFriSatSun
1234567
891011121314
15161718192021
22232425262728
293031 

Links


Kategorien


Letzte Beitrge

Free download Volvo Prosis Offline 01-2019 parts & service?
VXDIAG VCX SE : BMW ICOM cheap alternative
Benz 211 DTS diagnostic & programming (CBF) with Mercedes Benz C6
Using Tips Of KTM Bench ECU programmer
(Solved)kess v2 2.47 clone read ecu tmax 2007 error "Invalid protocol file"

Freunde